How to Clean, Oil, and Display a Katana: Choji Oil, Uchiko, and Traditional Rack Etiquette

A storage box made centuries after its contents

In the Metropolitan Museum of Art there is a mounting for a slung sword together with its storage box. The catalogue assigns the mounting to the Edo period and the box to about 1932. The materials listed for the ensemble include gold, wood, lacquer, leather and textile. Steel is conspicuously absent from that particular materials list. Before deciding how to clean or oil the thing in the photograph, it is worth noticing what the museum actually owns. The subject is a historical mounting and its box. Treating either as though it were the polished metal surface of a blade would mistake the identity of the object before any question of technique arose.

That is the first principle of caring for a katana as a work of art. Identify what is present and what is happening to it. Dust on the outside of a modern case, a fingerprint on its glass, a mark on an old lacquer scabbard and a patch of changing corrosion on iron call for different responses. Some can be dealt with through ordinary housekeeping well away from the collection. Others are reasons to leave the object undisturbed and call a conservator familiar with Japanese metalwork and lacquer. Describing all four as cleaning conceals differences that can determine whether a surface survives.

Traditional terms are part of this story. Chōji oil, uchiko and nugui-gami appear in accounts of the care of polished Japanese blades. Katanakake names a stand associated with their presentation. The words help us understand historical collections, modern custodianship and the stories told by their displays. They are most useful when attached to a particular surface or setting. A bottle label does not describe the condition of an antique, and a photograph of a museum rack does not tell us everything about the worn mounting, its support or the environment inside the case. These are matters to investigate separately.

Mounting for a Slung Sword (Itomaki-tachi Koshirae) with Storage Box; 2023.735.6a–e, Metropolitan Museum of Art, view 1
Mounting for a Slung Sword (Itomaki-tachi Koshirae) with Storage Box; 2023.735.6a–e, Metropolitan Museum of Art, view 1. The Metropolitan Museum of Art.

First make a record that someone else can use

If a family asks a museum whether a mark on a sword is new, the most useful thing they can offer is an earlier photograph showing the same area. A picture taken at a similar angle, with the same part of the mounting visible, may establish whether a change has occurred. A file name that includes a date and object identifier makes the picture recoverable years later. The written note should distinguish what the observer saw from what they think caused it. A small orange deposit appeared below a particular fitting is an observation. The statement that the room was too wet is an explanation still to be tested.

A useful condition record also includes what nobody has done. If the object has remained in a closed case for a stated interval, that matters. If the photograph was made through glass and a reflection hides part of the surface, that matters too. Where a side could not be seen without moving a fragile mounting, a blank marked unobserved is much better than a confident description inferred from the other side. Someone comparing two records later will need to know whether a feature has appeared or simply become visible for the first time. A good record can spare the object a great deal of unnecessary handling.

A second record concerns the environment. A case in the middle of an interior wall may behave differently from an apparently identical case beside a cold window. A change in heating, building work in an adjoining room or a leak above the ceiling can matter more to the collection than the date on a maintenance calendar. These events rarely look important enough to remember at the time. Writing them down gives a conservator possible explanations for a change without requiring anyone to experiment on the object. It also helps separate the history of the building from an inherited story about how often a former owner attended to the blade.

Oil, powder and paper in context

Chōji is the Japanese term commonly associated with clove, and chōji oil is a traditional name encountered in accounts of sword care. Products sold under that English name need not have identical composition. A historical reference to a scent or ingredient cannot establish what was in an unlabelled bottle in a later collection. If a custodian has a labelled product, the formulation and the date of the label are useful records to retain. They should stay with the object's documentation rather than being converted into a recipe from memory. The survival of a smell is especially poor evidence for the proportions of the materials originally present.

At a broad chemical level a continuous oil film can impede the access of moisture and oxygen to a metal surface. Film continuity, contamination and changes over time all influence what that explanation means in practice. An oil layer cannot remove dissolved salts from a damaged surface or repair a leaking display case. Nor does its presence establish that an old discoloration has stopped changing. In a historical collection an unknown coating may itself be evidence of earlier care. Removing or renewing it is a treatment decision with consequences for examination, photography and future analysis. It is reasonable to document an existing coating before any specialist decides what to do about it.

Uchiko refers to a fine polishing powder associated with traditional blade care. Its historical familiarity sometimes obscures the physical fact that particles can abrade a polished surface. Even a very slight change can affect how a feature reads under controlled light. A photograph that seems to show only dullness may actually show a finish chosen by a specialist, an old intervention or a change in the illumination. The conservative response to uncertainty is to protect the surface and obtain an examination. A household abrasive or a generic metal polish offers no way to recover the distinction once original material has been removed.

Nugui-gami is wiping paper mentioned in this tradition. Paper sounds innocuous, which makes it a useful illustration of why naming a material is not the same as authorizing a treatment. Its condition, the particles it has picked up and the delicacy of the surface in question all matter. A paper wrapping bearing an inscription may itself have historical value. Set it aside for identification with the rest of the documentation if it has already become separated. In particular, a traditional care kit found beside a family sword deserves to be recorded as an associated object; the association alone cannot tell us when the kit was last used or on what.

Blade and Mounting for a Sword (Katana); 91.2.58, Metropolitan Museum of Art, view 4
Blade and Mounting for a Sword (Katana); 91.2.58, Metropolitan Museum of Art, view 4. The Metropolitan Museum of Art.

Reading the air inside a case

Relative humidity expresses how near the air is to saturation at its current temperature. If the amount of water vapour in the air stays the same while the temperature falls, relative humidity usually rises. This explains why a reading taken in the centre of a room may not describe the conditions beside a cold surface. An exhibit can pass through a daily cycle while a single reading taken every afternoon looks reassuringly similar from one day to the next. A small data logger placed to characterize the case, with notes on changes in the room, is far more informative than an isolated percentage in a notebook.

For stable metal in a mixed collection, the Canadian Conservation Institute gives a general range of 35 to 55 percent relative humidity. It treats actively corroding metal as a separate case requiring drier controlled storage and qualified advice. These recommendations refer to specified conditions and materials. The figures should not be applied mechanically to an entire Japanese mounting incorporating lacquer, textiles, leather and wood. Lowering humidity to suit unstable iron may create a problem for a different component. An institution can provide different enclosures or control a local microclimate; a decision about a mixed historical assembly needs to account for the most vulnerable materials together.

Watch the time series as well as its average. A case that stays near the middle of a suitable range behaves differently from one that swings between the extremes while producing the same monthly mean. Compare that record with the room and with changes in the building. Opening a case for an event, moving it into sunlight or switching off climate control over a holiday can leave quite different patterns. Even a logger has a history. Its placement, calibration and sampling interval should be recorded. Otherwise it may be possible to describe the temperature of a warm corner very precisely while missing the conditions experienced by the collection.

An enclosure brings benefits beyond humidity control. It can reduce dust, discourage accidental contact and create distance between an object and ordinary activity in a room. It can also trap contaminants introduced with unsuitable materials. A closed case is therefore a system to understand, rather than a piece of transparent furniture that automatically solves every problem. Museum mount makers and conservators consider what lies beneath the object, what substances are enclosed with it and whether components can be inspected without contact. That planning is often invisible in a good exhibition because the visitor's attention goes where the designer wanted it, to the work of art.

Why edge up and edge down both appear in museums

The conventional contrast between a katana and a tachi is real. A katana was normally worn with its edge up through the sash, while a tachi in its characteristic mounting hung with its edge down. A Japan Tourism Agency account of swords in the Tokugawa collection explicitly connects presentation on a rack with these differences in wear. This provides a historical basis for two orientations that can otherwise appear contradictory in a gallery. The same collection can display both in ways faithful to their respective histories. Turning all objects the same way for visual tidiness could actually make some of them harder to understand.

Display and storage at a glance
Setting Edge and hilt Room and case climate¹ Oil and surfaces
Katana on a horizontal stand Edge up; hilt often to the viewer’s left. Stable mixed collection: 35–55% RH. A very thin protective oil film may suit polished steel. Keep lacquer and textiles oil-free.
Tachi on display Edge down on a horizontal support; a vertical stand has its own orientation. Use the same mixed-material guidance, including for silk suspension cords. Treat the exposed steel and decorated mounting as separate surfaces.
Shirasaya in storage Rest on a stable horizontal support, edge up; record hilt direction for the storage plan. Monitor the closed cabinet as well as the room; avoid sudden changes. Excess oil can enter the wooden mouth. A stained or damp interior needs specialist attention.

¹ Canadian Conservation Institute guidance for mixed collections uses a stable temperature setpoint within 15–25°C. The range is for choosing a setpoint, not for daily cycling. Active corrosion and fragile organic components require an individual plan.

Sources · Kunōzan Tōshōgū display · CCI metals storage · CCI climate guidance

The relationship between the visible face and the mounting can help explain inscriptions and decoration. A designer who anticipated which surface would face the viewer worked with that expectation. A museum may also want to show a particular inscription, compare two sides through photography or present a blade alongside a separately supported scabbard. A blade shortened during its history may complicate the familiar relationship among type, signature and orientation. An object pictured alone in a book can even be rotated for page layout. Without information about the editorial or curatorial setting, left and right on the page say remarkably little about the owner's intentions.

Sword-Hilt Collar (Fuchi) with Tiger in Bamboo, Cleveland Museum of Art
Sword-Hilt Collar (Fuchi) with Tiger in Bamboo, Cleveland Museum of Art. Cleveland Museum of Art.

A story repeated in English holds that placing the hilt to the left always signalled peace, while placing it to the right announced imminent conflict. It is a memorable interpretation. The institutional descriptions of wear and display cited here do not establish it as a universal historical code. To interpret a particular room one would want a period source identifying the household, the occasion, the position of the viewer and the rule actually observed there. Without that information one can report the visible orientation quite accurately and leave the intention open. A respect for etiquette includes respect for the possibility that several local traditions existed.

An excellent exhibition label might explain that the present arrangement follows a documented practice at a named collection. An equally useful label might say that a vulnerable mounting is supported in an unusual position because that is what its condition requires. The physical welfare of the object and the historical interpretation of its display need not compete if the visitor is told which decisions shaped the case. The direction a sword faced while worn can be illustrated in a drawing or a photograph if the surviving object cannot safely be supported in that orientation. An accessible explanation is often the most conservative intervention of all.

Japanese terminology helps keep this discussion precise. Tsuka refers to the hilt as a whole. Kashira names the fitting at its end. A note about which way the tsuka points is a note about the orientation of an assembly. A note about the kashira may instead refer to a small decorated object that has long been separated from its original setting. Fittings are frequently displayed on their own so that visitors can appreciate the metalwork. Reading an isolated fitting as evidence for the position of a complete sword on a household rack would confuse two quite different kinds of display.

What a mounting adds to the problem

Look at the Met's blade and mounting accessioned as 91.2.58. Its record gives a seventeenth-century date to the blade and a nineteenth-century date to the mounting. There are several materials and several historical surfaces to consider. An action that changes the look of the mounting can destroy evidence from a later but equally significant chapter of the ensemble's life. The blade is older; that does not give its appearance automatic priority over the conservation of every other component. A request to make the entire piece look its age has no single answer because the entire piece has no single age.

Lacquer is especially important in this respect. The Canadian Conservation Institute discusses the response of finished wooden objects to light and changes in humidity, including the damage that can occur when a film and its support respond differently. A photograph may show spectacular depth of colour in a lacquer scabbard without revealing fragile areas at its edges. Exposure to light accumulates over time. A case that makes an object look wonderful in direct sun for an afternoon may be a poor long-term home for it. A curtain, a change in display position or a period of rest in storage can preserve more than any attempt to improve the surface afterwards.

Small fittings present other challenges. A copper alloy, a decorative patina and traces of gilding can occupy the same small field. What looks like dark dirt to an unfamiliar eye may be a deliberate contrast central to the artist's design. A restorer asked to brighten every dark recess could remove the very information that allows an observer to read the scene. The hilt collar and guard shown here are reminders to identify materials before making decisions about their appearance. If a detail has become difficult to see, improve the viewing arrangement or consult an existing museum photograph before assuming the detail itself needs alteration.

Sword Guard (Tsuba) with Drum in Waves, Cleveland Museum of Art
Sword Guard (Tsuba) with Drum in Waves, Cleveland Museum of Art. Cleveland Museum of Art.

The practical work around the object

Much useful preservation work takes place at a distance from the collection. Keep an up-to-date list of components and their locations. Check the exterior of the enclosure for signs of a leak, condensation or loose hardware. Arrange cleaning of the surrounding room so that dust and sprays stay away from the exhibit. Keep records and emergency contacts where someone other than the usual custodian can find them. If work is planned on the building, decide in advance who can assess whether the case should remain in place. These measures have the great merit of leaving original surfaces available for examination tomorrow.

Suppose a visitor notices a pale fleck below a fitting. It may be old debris, a fragment of finish, material from the support or evidence of fresh change. A dated overview and a closer photograph taken without disturbing the display can preserve its location. If new flecks appear, the series of images will be more informative to the conservator than a polished surface and a recollection that something used to be there. The same applies to a new stain on a support. The first task is to preserve the relationship between the sign and the object long enough for someone qualified to interpret it.

The old mounting and its twentieth-century box bring us back to a larger idea of care. Someone commissioned a container long after the mounting was made. Someone else kept the association intelligible so that a museum could record both dates. A modern custodian adds another chapter by preserving those connections, observing change and making careful choices about the room in which an object lives. The blade, the mounting, the case and the record each deserve a different kind of attention. A good display lets a visitor enjoy them together while leaving their surfaces and their separate histories intact.

Frequently asked questions

How to display a katana?

A traditional horizontal presentation commonly shows the katana edge up. For a historical piece, a stable enclosure and a support appropriate to its mounting are part of the display decision.

What is choji oil?

Chōji oil is a historical name associated with oil used in the care of Japanese blades and with the scent of clove. Modern products with this label can differ in their composition.

What is uchiko?

Uchiko is fine polishing powder associated with traditional blade care. Its abrasive character matters when a conservator assesses a historic polished surface.

What is a katana stand called?

Katanakake is a Japanese term for a sword stand. Museum arrangements may adapt traditional orientations to the condition of the work and the features being explained.

How to clean a katana?

For a historic piece, first identify and photograph the area of concern. A qualified conservator can distinguish an old finish from a deposit or active corrosion before any surface treatment is considered.

How to store a katana?

Preserve the association between the blade, mounting and documentation. Monitor the enclosure for moisture, light and physical disturbance, and have mixed materials assessed together when their needs differ.

Films and talks

The Met — Conserving Japanese Works of Art in Foreign Collections

Nomura Group — 熱田神宮 剣の宝庫 草薙館

Collection records and further reading

Related Articles