A Japanese sword does not reveal its full structure when it leaves the forge. The togishi—the specialist sword polisher—establishes the planes, restores the geometry, and makes the hardened edge and forged grain legible. This is not cosmetic sharpening. It is a slow conservation and interpretive craft in which every stroke removes irreplaceable steel. From foundation polish to finishing stones, from the Hon’ami appraisal tradition to uchigumori and nugui, this guide explains what responsible polishing can reveal, what it can destroy, and why an old blade should never meet a casual grinder.

1. Polish is the final stage of making
Japanese swordmaking is often pictured as hammer, fire, and quench. Yet the forged blade leaves the smith with scale, rough surfaces, and unfinished geometry. Traditional polishing turns that forged object into a readable and usable blade. It refines the ridge, point, back, edge, and flat surfaces while bringing the hamon and jihada into view.
The togishi therefore works between manufacture and connoisseurship. The polisher must understand how a blade ought to be shaped for its period and tradition, how much metal can safely be removed, and which visual activities belong to the steel rather than to an artificial finish. A good polish serves the blade. A bad polish makes the surface bright while erasing information.
This distinction is easiest to see in the phrase kaji-togi, the smith’s preliminary finishing, and the specialized polish that follows. Exact workshop divisions vary, but the principle is stable: the blade’s final lines and visual evidence emerge through skilled abrasion. The polish is not a detachable coating. It is the present surface of the historical steel.
2. Why every stroke is irreversible
A stone removes steel. On a new blade, the polisher has material available to correct small forging irregularities. On a centuries-old blade, previous polishes may already have thinned the body, softened the ridge, or reduced the point. A deep rust pit cannot always be removed without sacrificing too much original shape.
This is why ethical conservation does not pursue perfect brightness at any cost. The togishi evaluates whether a flaw is active damage, a stable trace, or a structural danger. Some stains and shallow pits may remain. A tired area where core steel approaches the surface cannot be restored by polishing; further abrasion may expose it more clearly.
Owners sometimes ask a polisher to remove a chip completely. The geometry required to blend out that chip may move the entire edge line upward and reduce the blade. A professional explains the tradeoff. Preservation can mean accepting visible age rather than manufacturing a falsely new surface.
3. Foundation polish: shaping before display
The first major phase is commonly called shitaji togi, foundation polishing. Progressively finer water stones establish or correct the blade’s geometry. Traditional stone names include arato, binsui, kaisei, nagura, and uchigumori, though individual polishers select grades and sequences according to the blade.
| Term | What a curator examines | Conservation significance |
|---|---|---|
| Shitaji-togi | The broad planes and the lines where they meet | A changed outline can alter the evidence used in dating a work. |
| Shiage-togi | The appearance of a finished surface under light | Compare the lighting and date when reading historical photographs. |
| Uchigumori | A fine stone named in the polishing tradition | The name identifies a material in the craft record. |
| Nugui | A finishing treatment affecting tonal contrast | Differences in surface tone may reflect a history of treatment. |
| Nakago | Patina, file marks, peg holes and signatures | A polished blade and its aged tang preserve different kinds of evidence. |
The terms describe what conservators document. A treatment decision depends on the condition and history of the individual object.
At this stage the togishi works the blade against the stone with controlled pressure and short movements. The task is not simply to erase scratches from the previous grit. The polisher must preserve the shinogi ridge, the yokote division at the point when appropriate, the curvature, and the changing thickness toward the tip. One flat plane must meet another cleanly.
Coarse correction carries the greatest risk because it removes metal quickly. An incorrect angle can round a ridge or flatten a deliberate surface. Foundation polish is therefore not preparation delegated to an untrained assistant; it determines whether the final blade retains its historical form.

4. The geometry a togishi protects
A Japanese blade contains several named surfaces and lines. The shinogi is the longitudinal ridge separating the side plane from the upper surface. The ji is the area between ridge and hardened edge; the ha is the cutting region. The mune is the back. Near the point, the yokote often marks a change in geometry, while the fukura describes the curve of the point’s cutting edge.
These are functional and historical features, not decorative lines to be drawn on. Different periods and schools favor different proportions. Some blade forms do not have a conventional yokote. A restorer who forces every sword into one modern template destroys classification evidence.
The tang, or nakago, is treated differently. Its patina, file marks, holes, and inscriptions help establish age and history. It is normally not polished bright. Cleaning the tang with abrasives can erase signatures and make an old blade appear suspiciously new. Even red rust should be assessed by a qualified specialist before intervention.
5. Uchigumori: stone, particles, and judgment
Uchigumori is a fine natural polishing stone associated with the later foundation and transition to finishing. It is commonly prepared from Japanese sedimentary stone and selected for uniform, responsive abrasive particles. The name is famous enough that imitation products and vague descriptions circulate widely, so origin alone does not guarantee suitability.
A togishi tests how a stone behaves on a particular blade. Hardness, particle release, scratches, and feedback matter. A stone suitable for one steel surface may be too aggressive or uneven for another. Natural inclusions can scratch deeply if not found and removed.
Thin pieces of uchigumori can be processed into finger stones used in finishing. Hazuya and jizuya are prepared differently for the hardened edge and the body of the blade. Their use requires sensitivity to pressure and direction. The goal is to clarify the structures already present, not to paint a false pattern onto the steel.
The Metropolitan Museum of Art’s demonstration of Japanese sword polishing, independently verified through YouTube oEmbed. It shows the controlled hand work behind a surface that photographs can make look effortless.
6. Finishing polish: sashikomi and hadori
After foundation geometry is stable, shiage togi develops the final visual presentation. Two terms often encountered are sashikomi and hadori. They are not simply “natural” versus “fake,” and actual practice includes many variations.
Sashikomi-style finishing tends to emphasize the relationship between hamon and body through fine stones and darkening treatments, often leaving a comparatively direct view of the hardened boundary. Hadori uses finger-stone work to produce a pale band following the hamon. When skillfully applied, it helps viewers read the pattern under ordinary display lighting. When heavy or poorly matched, it can obscure fine activities and create a visual line broader than the hardened structure.
The appropriate finish depends on the blade, its condition, period, and intended study or display context. A qualified togishi does not impose the strongest contrast on every object. The finish should communicate the blade’s qualities without turning polish style into the main subject.
7. Hamon is metallurgical evidence
The hamon forms through differential hardening. Before quenching, the smith manages clay thickness, steel condition, temperature, and geometry. Rapid cooling at the edge produces hard martensitic structures, while the body remains tougher and transforms differently. The visible boundary and activities result from that thermal history.
Polishing changes how light interacts with those structures. It can make nioi, nie, ashi, yo, sunagashi, and other activities legible to a trained observer. It cannot legitimately add a hamon that is absent in the steel. Acid etching can create strong contrast, but it alters the surface and may misrepresent the traditional appearance.
Hamon terminology is descriptive, not a guaranteed maker fingerprint. Similar patterns can occur in different schools, and one smith may work in several styles. Appraisal considers shape, steel, hamon, point temper, tang, and workmanship together.
8. Jihada: reading forged steel
Jihada is the visible surface texture produced by repeated folding, welding, and manipulation of the billet. Common descriptive families include itame, mokume, masame, and combinations. These words compare patterns to wood grain or straight fibers, but the actual steel contains complex welds, carbon variation, and inclusions.
A good polish reveals jihada without exaggerating it. Too coarse a surface can hide fine grain; aggressive etching can make weld lines look like dramatic topography. Open welds, grain openings, and tired steel must be distinguished from desirable texture. Photography can further distort contrast.
Jihada is evidence of working method, but it does not literally count folds or prove a marketing claim such as “one million layers.” Each fold doubles an idealized layer count only in a simplified model, and subsequent welding, cutting, and surface position complicate what becomes visible. Quality depends on welding and material control, not on the largest number.

9. Nugui and the controlled use of contrast
Nugui refers to fine mixtures applied during finishing, often involving iron oxides and oil in recipes guarded or adapted by polishing schools. It can darken the ji and improve contrast with the hardened edge. Exact composition and sequence vary.
This step is another reason sword polishing cannot be reduced to sharpening stones. The togishi understands how the mixture interacts with the surface and how much visual change suits the blade. Excessive or unsuitable treatment may stain, obscure activities, or produce an artificial appearance.
Final work can also include burnishing selected upper surfaces with hard steel tools. Burnishing compresses and brightens rather than cutting like a stone. Done incorrectly, it scratches or distorts the surface. The completed polish is a coordinated system of geometry, abrasion, finger-stone work, nugui, and burnish.
10. The Hon’ami family: polishing, appraisal, and authority
The Hon’ami family became deeply associated with sword polishing, appraisal, and certification across the medieval and early modern periods. They served powerful patrons, evaluated blades, maintained records, and produced written attributions. Their authority helped shape how important swords were preserved and ranked.
“The Hon’ami family” should not be imagined as one unchanging opinion. It was a lineage with branches and generations. Attributions and valuations belong to particular historical contexts. Papers and inscriptions can be important provenance evidence, but scholars still compare the blade, document, handwriting, seals, and chain of custody.
Their combined roles show why polish and appraisal are connected. A blade must be legible before its workmanship can be judged, yet polishing can alter the evidence being judged. Ethical authority rests on restraint and documentation as much as technical brilliance.
11. Training and professional recognition
A traditional togishi trains for years under an experienced master. The apprenticeship develops body mechanics, stone preparation, historical judgment, and the ability to recognize danger before damage occurs. Text instructions cannot substitute for supervised work on appropriate practice pieces.
In Japan, the preservation of art swords is supported by professional networks, museums, and organizations concerned with sword culture. Important blades may require recognized specialists and formal permissions. Laws and procedures differ by country, so an owner must also check transport, registration, and insurance requirements.
Price and waiting time reflect labor, expertise, and risk. A proper polish may take weeks or longer. A low quote for a rapid mirror finish is not equivalent service. The irreversible nature of the work makes practitioner selection a conservation decision.
The Metropolitan Museum of Art on Japanese sword aesthetics, oEmbed-verified before publication. The discussion connects craftsmanship, viewing, and the disciplined vocabulary used to read a polished blade.
12. What machine polishing destroys
Powered belts, wheels, and grinders remove steel quickly and generate heat. They can round the shinogi, erase the yokote, flatten the point, wash out curvature, and leave deep scratches. Heat may affect the edge if severe. A buffing wheel can make a surface shiny while making its structure harder to study.
Acid, harsh metal polish, and abrasive paper present additional risks. Acid can etch unevenly and promote corrosion if residues remain. Sandpaper used without correct geometry rounds planes. Household metal polish can contaminate surfaces and remove patina from fittings or tangs.
Do not attempt to “test” sharpness by grinding a historical blade. If the sword may have age or importance, photograph it safely, record measurements and markings without cleaning, and consult a qualified appraiser or conservator. Stabilization and storage should precede aesthetic intervention.
13. Conservation before restoration
The first question is not “Can this be made beautiful?” but “What condition is it in?” Active red rust, cracks, bends, loose grain, fire damage, and previous alterations require different responses. A cracked edge may be unsafe to handle. Fire can destroy heat treatment even if the blade remains visually intact.
Good documentation records the blade before work, the agreed treatment, and discoveries during polishing. Photographs under controlled light, measurements, rubbings or careful transcription of tang inscriptions, and condition notes preserve information. Removed metal cannot be put back, but treatment decisions can at least remain traceable.
Sometimes the correct decision is no full polish. A window polish—a small professionally treated area—may help evaluation, though even that removes material. A stable archaeological or historically altered surface may be more important than visual display. Custodial institutions balance research, access, and preservation rather than applying one recipe.

14. How to look at a polished blade
Use diffuse light and change the viewing angle slowly. Shape is read first: curvature, width, taper, point, and overall balance. Then observe the planes and ridge. The hamon may appear and disappear as light moves; jihada often needs a different angle.
Do not touch the polished steel. Fingerprints contain salts and oils that can stain. Handle only under knowledgeable supervision, supporting the blade safely and following local museum or collector protocol. Never point the edge toward another person.
Read labels carefully. “Attributed to,” “school of,” and “signed” express different evidence. Note whether the polish is recent and whether the blade has been shortened. A beautiful surface is the beginning of observation, not proof of date, maker, or authenticity.
15. Choosing a polisher
Ask about training, recognized experience, treatment philosophy, insurance, and documentation. A professional should want to inspect the blade before promising a result. They should discuss losses and limitations openly and may recommend appraisal before work.
Be cautious of anyone who guarantees removal of every flaw, proposes polishing the tang, or treats all Japanese-shaped blades identically. Modern production swords and antique art swords have different priorities. Even a competent sharpener of kitchen knives may not have the geometry or conservation training for a nihontō.
For an owner, patience is part of preservation. The right specialist may have a queue. Shipping and legal requirements may be complex. These inconveniences are smaller than the permanent cost of an incorrect polish.
16. The togishi as an interpreter of evidence
A master polish can make a sword’s technical history visible: the smith’s forging, the quench, later reshaping, flaws, and centuries of care. It also inevitably becomes the newest chapter of that history. The polisher chooses how much to remove and how to present the surface.
That power calls for humility. The strongest polish is not always the best polish; the brightest blade is not always the best preserved. Responsible work aligns geometry, material, period, and condition.
The finished surface allows museum visitors and appraisers to see what fire and hammer placed inside the steel. Its beauty is inseparable from evidence. That is why togishi work belongs beside smithing in any serious history of the Japanese sword.
Frequently asked questions
Does polishing create the hamon?
No. The hamon is a hardened structure created during heat treatment. Polishing reveals it by controlling surface geometry and light; an artificial etched line is not equivalent.
What is uchigumori?
Uchigumori is a fine Japanese natural polishing stone used in advanced stages of traditional sword polishing. Selected pieces are also prepared into finger stones for specialized finishing.
Should the tang of an old Japanese sword be polished?
Normally no. Patina, file marks, holes, and inscriptions on the tang are historical evidence. Abrasive cleaning can destroy information and reduce confidence in the blade.
What is the difference between sashikomi and hadori?
They are families of finishing approach. Sashikomi generally presents the hardened boundary more directly, while hadori uses pale finger-stone work following the hamon. The appropriate choice depends on the blade and the polisher’s judgment.
Can a machine restore an antique katana?
A powered machine can quickly ruin ridge lines, point geometry, and surface evidence. Antique Japanese swords require assessment by a qualified togishi or conservator, not general machine buffing.
How long does traditional polishing take?
It varies with size, condition, and treatment, but a complete professional polish commonly requires weeks of labor and may involve a longer waiting list. Speed is not a sign of quality.
