The Ko-Bizen School: Okanehira, Tomonari, and the Birth of Classic Heian Tachi Proportions

Three curves in a Tokyo collection

The shortest of three early Bizen blades in Tokyo National Museum has the deepest curve. The longest has the most famous nickname. The middle example by length, signed Tomonari, is the one whose small point and narrow outline best fit a familiar description of the Heian tachi. Set them beside one another and a deceptively simple question opens up. When someone speaks of the classic proportions of an early Japanese sword, which object do they have in mind? A visitor can find different, equally instructive answers within the holdings of a single museum and within the works of a single provincial tradition.

The longest of the three is Okanehira. Its recorded blade length is 89.2 centimeters, with curvature of 3.5 centimeters. The national collection entry for the Tomonari tachi gives 79 centimeters and 2.4 centimeters respectively. For the tachi signed Kunikane the corresponding measurements are 77.3 and 4.5 centimeters. These figures offer an unusually good introduction to the art of reading a silhouette. Length alone would arrange the objects in one order; curvature alone puts the shortest one first. Neither ranking tells the viewer where along the back the deepest curve occurs, or how the width changes on the way to the point.

Start with an image of Okanehira that shows the entire object. Allow the eye to follow the long uninterrupted edge from one end of the photograph to the other. Then return along the back and notice the disposition of the metal between the two outlines. A cropped detail of the grain will answer a different question. A detail of the inscription will answer another. The full view deserves the first look because the physical achievement that so impressed successive owners involved a whole form. A pattern that fills the screen can still represent only a few centimeters of a much larger object.

Okanehira, signed Kanehira, Tokyo National Museum
Okanehira, signed Kanehira, Tokyo National Museum. Association of Cultural Properties、Japan (via Wikimedia Commons).

What the old in Old Bizen means

Bizen was a historical province in the region of present-day southeastern Okayama Prefecture. Ko-Bizen, conventionally translated as Old Bizen, is a retrospective way of grouping its early smiths. In its account of Tomonari, the national museums' e-Museum uses the emergence of the Ichimonji school in the early Kamakura period as a point of distinction. This definition locates a group in relation to its successors. It does not establish that a medieval smith called his workshop Old Bizen, or that all objects placed in the group were made in the same town by people working side by side.

A province can be a meaningful unit without corresponding neatly to a family tree. The inscription on Okanehira actually names Bizen, giving the regional association a material footing independent of modern cataloguing practice. The name Ko-Bizen, by contrast, lets a curator place Kanehira in conversation with Tomonari, Masatsune and Kunikane across separate records. It is possible to be quite definite about the regional wording on a particular tang while remaining cautious about the relationships among the men. Locality, kinship, teaching and similarity of style are four different ways of grouping people. Evidence for one does not automatically supply the others.

The difference matters when arranging a historical gallery. A succession of rooms can give the impression that one workshop closed its doors on the very day another opened. An object carries no obligation to display such a tidy transition. The national record dates the Tokyo Tomonari to the eleventh century; Okanehira and the Kunikane example belong to the twelfth. Visitors can see developments within a long early history before considering the large flowering clove patterns now closely associated with Fukuoka Ichimonji. Starting the story with the most spectacular later pattern would leave little room for a different kind of distinction found in these earlier pieces.

Why a single ruler will not describe a tachi

Blade length in a Japanese catalogue refers to a straight measurement from the base reference at the back to the point. Following the curve of the edge with a flexible measure would give another number. The tang is excluded even when it appears prominently in the photograph. Curvature records the greatest departure of the back from the straight reference across the blade. A long sword could be displayed with the tip almost touching the edge of an image, while a shorter sword fills exactly the same rectangle in the next illustration. Comparing photographs at equal display size is a good way to miss an actual difference of several centimeters.

Location matters as much as depth. Koshizori names a disposition in which the curve is particularly evident toward the base. With that word in mind, the reader of the Tomonari record can look for a change in the sweep of the outline along its length. Funbari adds a second observation about the relationship between width near the base and width farther along the blade. A small point, or ko-kissaki, introduces a third proportion. Together these details describe an object far more closely than saying simply that its shape is graceful. Each refers to a visible relation that another person can examine in a suitable view.

Tachi attributed in the museum photograph to Tomonari
Tachi attributed in the museum photograph to Tomonari. Kakidai (via Wikimedia Commons). License.

There is a temptation to express the entire comparison as a ratio. Dividing the recorded curvature by the length does yield a greater relative value for Kunikane than for the other two. But two outlines can have identical endpoints and identical maximum departure while carrying their curves in quite different places. A ratio cannot tell them apart. A curatorial description preserves what the calculation leaves out. The converse also holds. Words such as deep or shallow have a clearer meaning when supplied with a scale. The strongest comparison moves back and forth between the measurements and the unbroken outline, keeping each available to check an impression formed from the other.

Reading the signature on the Great Kanehira

Okanehira is a name for this particular tachi. Kanehira is the smith named on it. The national museum draws attention to the unusually extended form of the signature, which includes the province and a statement of making. Many works associated with Kanehira instead carry a signature consisting of the two characters of his name. The distinction is easy to lose in English, where a title such as Great Kanehira could suggest a fuller version of the maker's personal name. The additional element in the familiar name belongs to the biography and reception of the individual blade.

The museum identifies the name in an Edo-period handbook of famous works associated with the Kyōhō era. That is substantial evidence for how the piece was known by the time of the handbook. It would be a mistake to read the entry as a record produced in the smith's own lifetime. A medieval inscription and an early modern compilation can refer to the same object across a considerable interval. Each preserves information appropriate to its occasion. One locates the maker through a name and place; the other locates a named possession among the works considered worthy of recording by later connoisseurs.

The same museum account groups Kanehira with Sukehira and Takahira in a traditional trio of Bizen smiths. In Roman letters the repeated ending makes it easy to remember the names. What the device preserves is a way previous generations organized their knowledge. It supplies no dates for their personal acquaintance and no proof that they took part in making a common object. The very existence of several overlapping classifications is part of the interest of early Bizen history. Old Bizen situates the smith regionally, a traditional trio helps remember a group of names, and the long inscription stands as evidence tied to a single surviving piece of metal.

A large work within a tradition of slender ones

The exceptional size of Okanehira might seem to make it the natural starting point for describing Kanehira's typical output. The museum makes almost the opposite observation. It mentions slender works by the same maker and presents this imposing example as an exception. This is a recurring difficulty in the history of art. The work that becomes best known can be the least reliable guide to what a maker ordinarily produced. A superlative draws visitors across a gallery and keeps a name in circulation for centuries. Once they arrive, the quiet point in the label about the artist's other work is at least as valuable as the superlative.

The Metropolitan Museum's historical exhibition of samurai art offers a useful second description of the surface. Its account calls attention to the grain of the body and to short, bright features visible within it. Those observations concern the appearance of the metal in addition to the silhouette. They explain why the tachi could command sustained attention at different viewing distances. From across the case the eye registers breadth and sweep. From a closer view, or from a properly enlarged digital image, short features interrupt what had looked like an uninterrupted surface. A notice concerned only with the object's size would neglect that second experience altogether.

The reverse face pictured later in this article serves a particular purpose. One side of a blade is not a tracing of the other. Lighting also changes when a photographer moves around a polished object. Two views can therefore resemble different pieces to a reader who encounters the images separately. An accession number, an unambiguous caption and the directional information in the catalogue do more to connect them than an intuition about which patch of pale detail ought to look familiar. That is one reason a museum can publish several views of a single treasure without being redundant. Different faces preserve different visual information about the same object.

Tomonari and the small point

Tomonari's national collection record gives the identifier F-20188. The entry sets a traditional account placing the smith around the Eien era alongside the museum's eleventh-century date for the object. Those statements have different subjects and different degrees of precision. A traditional date assigned to a maker need not be an exact year for a surviving blade. Nothing in the record requires us to choose a particular year within an era and put it in a caption as the date inscribed on this tachi. A good caption can accommodate both the museum's object date and the longer history of the name.

Look at the small-scale irregularities that the entry describes along the hardened margin. Their limited changes in height contribute to the visual character of the piece. The description also mentions faint utsuri in the body of the steel, alongside a grain likened to wood. A first-time visitor might have expected everything important to appear in the bright band closest to the edge. Here there are things to see outside that band as well. One passage appears relatively restrained at a distance and more complicated under close observation. The published description gives the reader a reason to return to a place the eye might otherwise skip.

A picture of an elaborate chain-mounted ensemble associated with a Tomonari blade is included here for a different comparison. The fittings photographed in Tokyo are nineteenth-century work by Kitagawa Hokusen. Their date places the mounting far from the era assigned to the early blades. It is quite possible to value the same name at different periods through very different visual forms. Identification of the fittings should respect their own date and maker. The survival of later fittings offers no general license to reconstruct the appearance of eleventh-century mounts from whatever elaborate ensemble now happens to accompany a medieval work.

Nineteenth-century chain-mounted tachi fittings by Kitagawa Hokusen for a blade by Tomonari, Tokyo National Museum
Nineteenth-century chain-mounted tachi fittings by Kitagawa Hokusen for a blade by Tomonari, Tokyo National Museum. Daderot (via Wikimedia Commons).

The lesson of the third blade

Kunikane's work provides a valuable check on conclusions reached from the two better-known names. The national museums give it the identifier F-19832 and describe the survival of comparatively few examples. The tachi combines a narrow form with a pronounced curve near the base. Its surface description includes small irregular and small clove-like elements in the hamon. This is of particular interest to anyone arriving from the history of Ichimonji. The clove image belongs to the descriptive vocabulary of early Bizen as well. Its presence by itself cannot move an object from the older group into the later school.

In this group Kunikane also offers an example of what happens when value is confused with frequency. Comparatively few surviving examples can make a recorded piece essential to a historical comparison. That does not make it safe to use a single object as a statistical portrait of an entire career. Different smiths are represented in museum collections by very different numbers of objects. Loss, family transmission, later collecting and the difficulty of attribution all intervene between production and modern study. A list of names in a catalogue is a map of what is available for examination. The scale of a medieval workshop would require evidence of another kind.

Take the three lengths together once more. The difference between the Tokyo Tomonari and Kunikane is less than two centimeters, yet their recorded curvature differs by more than two. Okanehira extends well beyond both, without exceeding Kunikane's curvature. This is enough evidence to retire the idea that increasing blade length simply enlarged every other feature in proportion. It is also a good place to stop before turning an observation about three survivors into a law about thousands of lost objects. The result is modest and testable. Anyone with access to the three published records can check it without relying on a modern reconstruction.

From an Ikeda heirloom to a national collection

Ikeda Terumasa figures in the Tokyo museum's account of Okanehira, and the blade passed down in the Ikeda family associated with Okayama. This connects an early provincial work with a much later history of elite ownership in the region. The interval between the smith and the Ikeda matters. The collection history tells us something about the value assigned to early Bizen work by later owners; it does not turn a family living centuries after the blade was made into its original patrons. What continued across that interval was the object. The reasons for admiring, cataloguing and displaying it could change substantially.

Reverse face of Okanehira, Tokyo National Museum
Reverse face of Okanehira, Tokyo National Museum. 国立文化財機構 (via Wikimedia Commons). License.

The difference is visible even in the forms of access available today. The handbook preserved a famous name. Family transmission preserved the object as a recognizable heirloom. A national museum now gives its measurements and photographs to readers who may never stand in the gallery. An international exhibition placed the tachi beside works chosen to tell a broad history of samurai art. Each setting asks something slightly different of the same material survivor. The museum's digital record is particularly powerful for comparative work because the information about Kanehira can be placed beside that of Tomonari and Kunikane without waiting for all three to be exhibited at the same time.

One more distinction belongs on a gallery label. National Treasure is a formal designation for an individual cultural property. The nickname of an outstanding work, its former rank in a family collection and its present legal designation belong in separate fields. Finding all three in an account of Okanehira is evidence of a long and unusually well documented public reputation.

That comparison gives the idea of a classic Heian proportion a useful, limited meaning. A viewer can recognize the concentration of a curve near the base, follow the taper of a relatively narrow blade and notice the scale of the point. Another contemporary object can stretch the overall proportions far beyond that first example. A third can deepen the curve while reducing the length. The three examples make a historical tradition intelligible by preserving differences as well as relationships. After studying the most famous of them, the most rewarding next stop in the collection may be the less celebrated blade whose curve first upset the expected order.

Frequently asked questions

Where is Okanehira today?

Tokyo National Museum holds the National Treasure tachi known as Okanehira, formerly an heirloom of the Ikeda family.

What are the recorded measurements of Okanehira?

The national e-Museum records a blade length of 89.2 cm and curvature of 3.5 cm.

Who signed Okanehira?

Its inscription names Kanehira and Bizen Province. The name Okanehira appears in later accounts of famous swords.

What does Ko-Bizen mean?

It means Old Bizen. In these national collection records it groups early smiths of Bizen who preceded the Ichimonji tradition.

What is distinctive about the Tokyo Tomonari tachi?

The national record describes a narrow silhouette, curvature concentrated near the base, pronounced taper and a small point.

Does the longest tachi in this comparison have the greatest curvature?

Kunikane has the greatest recorded curvature of the three, 4.5 cm. The longest blade is Okanehira.

Films and talks

美術史チャンネル — 「国宝展」解説!㉖《太刀 銘 備前国包平作 名物 大包平》(国宝 12世紀 東京国立博物館)刃文と地金を美しく表し、長く、幅広で、大振りの豪壮な姿、しかし軽量に作られた、刀工の技が光る平安時代の太刀

迫田貫路 — 日本刀 国宝・古備前正恒  Samurai sword National Treasure

Collection records and further reading

Related Articles