Heshikiri Hasebe (圧切長谷部): How Oda Nobunaga's 'Press-Cut' Tachi Became an Uchigatana National Treasure

Among the surviving blades associated with the three great unifiers of sixteenth-century Japan, few command the visceral historical presence of Heshikiri Hasebe (圧切長谷部, literally "The Press-Cutter Hasebe"). Designated a National Treasure of Japan (Kokuho) in 1953 and housed in the permanent collection of the Fukuoka City Museum, this fourteenth-century blade bridges two of the most transformative epochs in Japanese military history: the giant-sword cavalry warfare of the Nanbokucho period (1336–1392) and the close-quarters castle politics of Oda Nobunaga's Sengoku campaigns.

National Treasure Heshikiri Hasebe katana by Hasebe Kunishige displayed in museum case showing wide mihaba and hitatsura hamon
Museum exhibition view of the National Treasure katana Heshikiri Hasebe (nagasa 64.8 cm, sori 0.9 cm), displaying its wide Nanbokucho mihaba, extended o-kissaki point, and flamboyant hitatsura tempering.

1. The Origin of the Name "Heshikiri": Oda Nobunaga and the Kannonji Incident

In classical Japanese sword terminology, the verb heshikiru (圧し切る) does not mean to swing a blade overhead in a conventional drawing cut. Instead, it means to sever an object by pressing the edge straight down through resistance using sheer body weight and structural rigidity. According to the Edo-period Kuroda clan chronicle Kuroda Kafu and the sword appraisal records of the Hon'ami family, the blade acquired this sobering epithet while in the possession of the warlord Oda Nobunaga (1534–1582).

A tea steward named Kannai (カンナイ) committed a grave offense against Nobunaga and fled in terror into the palace kitchen, wedging himself beneath a heavy wooden dining sideboard (zen-dana). Rather than waiting for guards to drag the man out or raising his sword for a full swing in the cramped room, Nobunaga drew his Hasebe Kunishige blade, slid the steel beneath the low cabinet shelf, and leaned his weight forward—pressing the blade straight through the fugitive without a wind-up stroke. Amazed that a slender, thinlyprofiled blade could shear cleanly under pure downward compression without chipping or bending, retainers thereafter referred to the sword as Heshikiri Hasebe.

Documentary analysis examining the historical records surrounding Oda Nobunaga's Heshikiri Hasebe and its provenance through the Kuroda daimyo treasury.

2. Hasebe Kunishige and Soshu-Den Metallurgy in Fourteenth-Century Kyoto

To understand why Heshikiri Hasebe could withstand extreme lateral and compressive forces despite a relatively thin spine thickness (kasane), one must examine its creator: Hasebe Kunishige (長谷部国重), an elite swordsmith active in Yamashiro Province (modern Kyoto) during the Engen and貞治 (Joji) eras of the Nanbokucho period. Tradition holds that Kunishige was one of the Masamune Juttetsu—the Ten Great Disciples of the legendary Kamakura smith Goro Nyudo Masamune—who brought the revolutionary Soshu-den (相州伝) metallurgical tradition from Sagami to the imperial capital.

Macro metallurgy detail of Heshikiri Hasebe blade showing hitatsura full-temper hamon, tobiyaki islands, muneyaki, and itame-hada
Macro metallurgical inspection of a Hasebe Kunishige blade surface showing hitatsura (full-tempered) activity: floating tobiyaki martensite islands, muneyaki along the back ridge, and coarse nie crystals over fine itame-hada.

During the Nanbokucho civil wars between the Northern and Southern Imperial Courts, swordsmiths forged massive field blades with wide blade breadth (mihaba), shallow thickness (usugasane), and elongated spear-like points (nobiru o-kissaki). If forged with conventional low-temperature water quenching, such wide, thin blades risked catastrophic snapping upon impact with lamellar armor. Hasebe Kunishige solved this structural dilemma through two signature techniques visible across every centimeter of Heshikiri Hasebe:

  • Jigane (Forging Grain): A tightly compacted ko-itame hada (fine wood-grain pattern) blended with nagare-hada (flowing grain) and covered in dense ji-nie (microscopic martensitic crystals) and chikei (darkened high-carbon lines).
  • Hitatsura Hamon (皆焼, "All-Over Tempering"): By applying thin, discontinuous patterns of insulating clay across both the cutting edge and the upper body of the blade prior to higher-temperature austenitizing, Kunishige produced a dramatic landscape of gunome-midare (undulating waves), tobiyaki (isolated islands of hardened martensite floating in the softer pearlite body), and muneyaki (hardened temper along the back spine). This dual-phase matrix acts like a composite leaf spring—resisting bending while keeping a razor-hard martensitic edge.

3. O-Suriage and Hon'ami Kotoku's Gold Inlay (Kinzogan-Mei)

When Hasebe Kunishige originally quenched this blade in the mid-1300s, it was not a waist-worn uchigatana; it was a long cavalry tachi or field sword likely measuring over 85 to 90 centimeters in cutting length. Two centuries later, as Sengoku battlefield tactics shifted toward dense infantry formations and indoor castle engagements, samurai systematically shortened antique Kamakura and Nanbokucho blades from the tang upward—a process known as o-suriage (大磨上, "great shortening").

O-suriage shortened nakago tang of Heshikiri Hasebe featuring Hon'ami Kotoku gold-inlaid kinzogan appraisal inscription
Close-up of the o-suriage nakago (tang) showing two peg holes (mekugi-ana), slanted katte-sagari file marks, and the 12-character gold-inlaid kinzogan-mei by Hon'ami Kotoku: "Heshikiri Hasebe / Kunishige Hon'a (kao)".

Because o-suriage removed the original signed section of the tang, the blade became formally mumei (unsigned). During the Momoyama period, the supreme sword appraiser Hon'ami Kotoku (本阿弥光徳, 1554–1619) authenticated the blade and chiselled a two-column gold-wire inlay (kinzogan-mei, 金象嵌銘) directly into the shortened tang:

Obverse (Omote) Inlay: 圧切長谷部 (Heshikiri Hasebe)
Reverse / Second Column Inlay: 國重 本阿(花押) (Kunishige / Hon'a [monogram])

Even after losing more than twenty centimeters of its lower body, the surviving 64.8 cm blade retains a remarkably wide base (motohaba 3.05 cm) and tip width (sakihaba 2.50 cm), giving it the unmistakable, powerful silhouette of a cut-down Nanbokucho giant.

4. From Oda Nobunaga to Kuroda Yoshitaka: The Fukuoka Daimyo Mountings

Following the Kannonji incident, archival records differ slightly on the exact chain of presentation: the Kuroda Kafu states that Oda Nobunaga personally bestowed Heshikiri Hasebe upon the brilliant strategist Kuroda Yoshitaka (Kanbei) when Kanbei pledged allegiance in 1575, whereas another tradition records that it passed from Nobunaga to Toyotomi Hideyoshi before being gifted to Kuroda Nagamasa. Regardless of the intermediary, the sword became the supreme heirloom of the Fukuoka Domain's Kuroda daimyo house for over 350 years until it was donated to the City of Fukuoka in 1978.

Edo-period Kuroda clan daimyo uchigatana koshirae mounting with gold and black ribbed scabbard alongside the bare blade
The Edo-period Kin-Ararehada Hada-Saya Uchigatana Koshirae preserved alongside Heshikiri Hasebe, modeled after Toyotomi Hideyoshi's opulent Momoyama court taste.

5. Technical Specifications & Kantei Summary Table

Attribute Measured / Historical Specification Kantei (Appraisal) Significance
Designation National Treasure of Japan (Kokuho, designated March 31, 1953) Preserved at Fukuoka City Museum (Kuroda Family Memorial Collection)
Smith & Period Hasebe Kunishige (Yamashiro Province, Nanbokucho Period, 14th Century) Founder of the Hasebe school; one of the Ten Disciples of Masamune
Nagasa (Blade Length) 64.8 cm (approx. 2 shaku 1 sun 4 bu) Shortened via o-suriage from a ~90 cm Nanbokucho cavalry tachi
Sori (Curvature) 0.9 cm (saki-zori tendency after shortening) Shallow curve optimized for fast indoor drawing and thrusting control
Mihaba & Kasane Motohaba 3.05 cm / Sakihaba 2.50 cm / Kasane 0.65 cm Minimal taper from base to point with an extended o-kissaki
Hamon & Nakago Hitatsura with tobiyaki & muneyaki; o-suriage with Hon'ami Kotoku kinzogan-mei Classic Soshu-inspired high-temperature nie activity and gold inlay

6. Frequently Asked Questions (FAQ)

Where can Heshikiri Hasebe be seen today?

Heshikiri Hasebe is permanently housed at the Fukuoka City Museum in Sawara Ward, Fukuoka, Japan. To protect its centuries-old polish and lacquered koshirae from light exposure, the blade is typically exhibited to the public for one month each year—almost always throughout the month of January—drawing tens of thousands of historical sword scholars and visitors.

Why did samurai shorten prized Nanbokucho tachi via o-suriage?

Fourteenth-century Nanbokucho blades were prized in the Sengoku and Edo periods for their wide, intimidating profile and superior steel quality, but their original 85–100 cm lengths were unwieldy for on-foot fighting or wearing edge-up through the sash (obi). Shortening the tang (o-suriage) allowed a warlord to wield legendary fourteenth-century steel at a fast, maneuverable 64–70 cm uchigatana length, while the Hon'ami family preserved the smith's identity in inlaid gold.

What makes a hitatsura hamon different from a standard suguha or choji hamon?

While suguha (straight) and choji (clove-shaped) temper lines confine hard martensitic crystals strictly along the cutting edge (ha), hitatsura ("all-over tempering") intentionally places hardened martensitic clouds (tobiyaki) across the flat sides (shinogi-ji) and back ridge (muneyaki). Pioneered in the late Kamakura and Nanbokucho Soshu tradition, it requires exceptional control of clay thickness and water temperature during yaki-ire to prevent the blade from cracking.

Related Articles